RS-232 (bi-directional)– control HDBaseT input device or control the CX100-RAMP The ducking depth is controlled by the pot next to the microphone jack. Once you stop talking on the microphone, the active audio will return to full volume. When the voice-over button is pressed you can talk in the microphone and the current audio (line input) will be ducked so the microphone can be heard better. Gain and Voiceover – The voice over button mixes the microphone input on top of any currently active audio source. There is no 48V phantom power for microphone on this product – The CX100-RAMP is designed for a direct jack connection for a dynamic/wireless mic.Īudio Line Input – The audio line input is balanced or unbalanced depending on wiring the phoenix plug. The gain setting pot is next to the jack. Microphone Input – The microphone input jack is meant for a dynamic microphone and simultaneously for a generic 3.5mm jack to connect an iPhone/Android/etc. These EDID settings carry over to the eARC capability table as well. EDID tables are also internally manipulated between the HDBT and HDMI ports so that HDBT never gets a real signal over 300MHz while the HDMI input can simultaneously input 600MHz. But it is possible to choose the AUTO HDR 7.1 in case such is needed. The audio is by default always stereo since RAMP is a stereo amplifier. Some smart parameters include upscaling, downscaling, bt2020 support (WCG), deep color supported, HDR, etc., the overriding functions just mean that if AUTO SDR is selected then this will be reflected in the EDID presented to the source. Both outputs always scan the sink and optimize the signal for the given display separately. The input side is always given the max possible EDID capabilities. All RAMP I/O is automated with respect to one of these 3 positions. The rotary switch default position 0 is “AUTO SDR”, position 1 is “AUTO HDR” and position 2 is “AUTO HDR 7.1”. OSD – Onscreen Display – a robust OSD allows operator and installer see real time data on audio and video signals.įull Smart EDID Management functions – Smart EDID management starts with the unit’s rotary switch. eARC from sink (TV) tells how long video frames take to display in TV (maybe around 2-3 frames = 50msec) and feeds this info to CX100-RAMP – The CX100-RAMP delays by this amount automatically. The product supports audio delay up to 170 msec – This is used for correcting latency associated with eARC. IP controlled 25 w per channel amplifier – use any control system or webOS to control the amplifier, very easy to integrate into existing rooms and new builds.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |